Technical data sheet

InoTec Surface Cleaner P

Field of application

Cleaning and brightening of stainless steel surfaces.
The product removes organic contaminations, surface rust and slight grease or oil deposits.
Suitable as a pre-treatment before the pickling process.

Use

Spraying, immersing or manual application with a paint brush.
Apply a sufficient amount of the product evenly to the stainless steel surface.
Do not use in direct sunlight.
Read the packing label before use and follow the instructions.

Yield

7 – 10 m² stainless steel surface per kg InoTec Surface Cleaner P.

Residence time

20 – 30 minutes
Dependent on the degree of contamination of the surface that is to be treated.

Rinsing

Cold high pressure water or water bose and cleaning brush.
Rinse until rinsing water is neutral (to be checked with indicator paper).

Disposal

The product and the rinsing water must not be lead into the sewage system.
The product and the rinsing water must be disposed of according to legal requirements (hazardous waste).
Treatment in neutralisation plant or disposal by an authorised company is mandatory.
Local statutory regulations must be followed.

Safety advice

The product contains phosphoric acid (C, corrosive).
Follow safety advice and instructions from EC safety data sheet.

Declaration for transport

Corrosive liquid, toxic. not noted otherwise.
UN-No. 1805, class 8 / PG III. ADR/RID

Packing units

Canister 10 kg Item-No.: 69-999-15

Canister 20 kg Item-No.: 69-999-17

Canister 30 kg Item-No.: 69-999-18

Barrel 200 kg Item-No.: 69-994-19

IBC 1000 kg Item-No.: 69-994-20