Technical data sheet

InoTec Neutralisation Paste NP

Neutralisation agent for InoTec pickling pastes
____________________________________________________________________________________________

Field of application

Neutralisation of acid InoTec pickling pastes on stainless steel welding seams
after the pickling process has been finished.

Use

Apply the product manually with a special InoTec pickling paint brush after the pickling process has been finished.
Use the same layer thickness as with InoTec pickling paste.
Read the packing label before use and follow the instructions.

Yield

Approx. 50-80 m of welding seam per kg InoTec Neutralisation Paste NP, dependent on the condition and
the dimensions of the welding seam area.

Residence time

Approx. 5 minutes

Rinsing

Cold high pressure water (min. 140 bar).

Subsequent treatment

InoTec Passivation Agent PV for immediate development of the passive layer.

Disposal

The product and the rinsing water must not be lead into the sewage system.
The product and the rinsing water must be disposed of according to legal requirements (hazardous waste).
Treatment in neutralisation plant or disposal by an authorised company is mandatory.
Local statutory regulations must be followed.

Safety advice

The product contains calcium hydroxide.
Follow safety advice and instructions from EC safety data sheet.

Declaration for transport

Corrosive, alkaline liquid
UN-No. 3266, class 8 / PG II. ADR/RID

Packing units

PE-can 2kg (in units of 6 cans at 2kg) Item-No.: 49-999-13
12 kg wide-mouth canister Item-No.: 49-999-16

Caree-Chemie GmbH, Hüttenstrasse 31, D-52355 Düren
Tel.: +49 (0) 24 21 - 225 93 - 50, Fax: +49 (0) 24 21 - 225 93 - 55, e-mail: info@caree-chemie.de